Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ethernet to 2 RS232
02-28-2018, 07:31 PM,
Post: #1
Ethernet to 2 RS232
I cannot connect to the device. I connect it on to my switch and ping and nothing. I have reset the device by shorting out pins on J15 as per instructions.

I have connected the device directly to my computer with a cross cable but nothing.
The power red light is on (12v) and one yellow light on the cat5 connector.  I cannot ping the device on this setup.

I have looked on my router and it is not on there.
What else can I do?
03-21-2018, 01:00 PM,
Post: #2
RE: Ethernet to 2 RS232
Hi Denis,

If you attempted the hardware reset of the ESL and are still unable to ping the unit then I would suggest opening a ticket with our Support Desk ( and they will be able to walk you through the RMA procedure.

- LAVA Support
03-21-2018, 01:56 PM,
Post: #3
RE: Ethernet to 2 RS232
You can close this inquiry.  I have return the unit to the original owner.
Tnx for the help


Forum Jump:

Users browsing this thread: 1 Guest(s)