Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Serial 2 TCPIP portserver question
07-24-2015, 09:54 AM,
Post: #1
Serial 2 TCPIP portserver question
Please provide the following information:



If the LLbox is to be configured behind a firewall, Which ports should be excluded in order to get the LL to work?


Thanks,
Reply
07-24-2015, 12:02 PM,
Post: #2
RE: Serial 2 TCPIP portserver question
You should only need to enable port forwarding on the specific TCP Port of the Serial Port you would like to access. By default the TCP ports of Ports 1 and 2 are 4098 and 4097, respectively. Once port forwarding has been enabled on the router you should be able to create a WAN Activation through the Manager (second tool bar icon from the left) by providing the router's static IP Adress along with the forwarded TCP port.

I will point out that it impossible to have the Manager automatically discover the ESL over a WAN as routers will not propagate the discovery packet utilized by the Manager.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)