https://forum.lavalink.com/ Sun, 26 Apr 2026 14:00:33 +0000 MyBB https://forum.lavalink.com/showthread.php?tid=21400 Wed, 25 May 2016 16:45:00 +0000 jheinrichs]]> https://forum.lavalink.com/showthread.php?tid=21400 I have installed and verified that the printer is installed and working through Windows Device manager.

On the machine that I previously used I had to set the parallel port to PS/2 mode. ECP and EPP didn't work with the printer.

My Lava Card is:

PN - MOKO L72.2A
It also has:
TS-04
94V-0
4302

on the card.

I used this driver: http://lavalink.com/support-drivers/pci-...-port-epp/

The description says EPP but I am hoping that I can use a different mode.

I did go to this link: http://lavalink.com/support-drivers/lava...utilities/
but non of the utilities seem to work with a fully patched Windows 7 64bit machine.]]> I have installed and verified that the printer is installed and working through Windows Device manager.

On the machine that I previously used I had to set the parallel port to PS/2 mode. ECP and EPP didn't work with the printer.

My Lava Card is:

PN - MOKO L72.2A
It also has:
TS-04
94V-0
4302

on the card.

I used this driver: http://lavalink.com/support-drivers/pci-...-port-epp/

The description says EPP but I am hoping that I can use a different mode.

I did go to this link: http://lavalink.com/support-drivers/lava...utilities/
but non of the utilities seem to work with a fully patched Windows 7 64bit machine.]]>