RE: Serial 2 TCPIP portserver question
LavaSupport > 07-24-2015, 12:02 PM
You should only need to enable port forwarding on the specific TCP Port of the Serial Port you would like to access. By default the TCP ports of Ports 1 and 2 are 4098 and 4097, respectively. Once port forwarding has been enabled on the router you should be able to create a WAN Activation through the Manager (second tool bar icon from the left) by providing the router's static IP Adress along with the forwarded TCP port.
I will point out that it impossible to have the Manager automatically discover the ESL over a WAN as routers will not propagate the discovery packet utilized by the Manager.