Serial 2 TCPIP portserver question - Printable Version +- LAVA: Forums (https://forum.lavalink.com) +-- Forum: Support (https://forum.lavalink.com/forumdisplay.php?fid=43) +--- Forum: Serial Over IP (https://forum.lavalink.com/forumdisplay.php?fid=70) +--- Thread: Serial 2 TCPIP portserver question (/showthread.php?tid=20952) |
Serial 2 TCPIP portserver question - roetman - 07-24-2015 [font='Helvetica Neue', Helvetica, Arial, sans-serif]Please provide the following information: [/font] If the LLbox is to be configured behind a firewall, Which ports should be excluded in order to get the LL to work? [font='Helvetica Neue', Helvetica, Arial, sans-serif]Thanks,[/font] RE: Serial 2 TCPIP portserver question - LavaSupport - 07-24-2015 You should only need to enable port forwarding on the specific TCP Port of the Serial Port you would like to access. By default the TCP ports of Ports 1 and 2 are 4098 and 4097, respectively. Once port forwarding has been enabled on the router you should be able to create a WAN Activation through the Manager (second tool bar icon from the left) by providing the router's static IP Adress along with the forwarded TCP port. I will point out that it impossible to have the Manager automatically discover the ESL over a WAN as routers will not propagate the discovery packet utilized by the Manager. |