Default password for LAVA Ether-Serial Link - Printable Version +- LAVA: Forums (https://forum.lavalink.com) +-- Forum: Support (https://forum.lavalink.com/forumdisplay.php?fid=43) +--- Forum: Serial Over IP (https://forum.lavalink.com/forumdisplay.php?fid=70) +--- Thread: Default password for LAVA Ether-Serial Link (/showthread.php?tid=16) |
Default password for LAVA Ether-Serial Link - admin - 11-14-2011 Issue: The Ether-Serial Link (ESL) is password protected after a factory default reload, or when received from the factory. In order to configure the device via the Lava Manager or embedded webpage the user must provide a password. Resolution: For full administration access the configuration password is “admin”. For port level access the configuration password is “portN”, where N is the logical port number. (i.e. Port 1 password would be “port1”, etc). Applies to: - All ESL Devices |