05-25-2016, 12:45 PM
I have a very old BOCA printer that I want to get working on my Windows 7 64bit machine.
I have installed and verified that the printer is installed and working through Windows Device manager.
On the machine that I previously used I had to set the parallel port to PS/2 mode. ECP and EPP didn't work with the printer.
My Lava Card is:
PN - MOKO L72.2A
It also has:
TS-04
94V-0
4302
on the card.
I used this driver: http://lavalink.com/support-drivers/pci-...-port-epp/
The description says EPP but I am hoping that I can use a different mode.
I did go to this link: http://lavalink.com/support-drivers/lava...utilities/
but non of the utilities seem to work with a fully patched Windows 7 64bit machine.
I have installed and verified that the printer is installed and working through Windows Device manager.
On the machine that I previously used I had to set the parallel port to PS/2 mode. ECP and EPP didn't work with the printer.
My Lava Card is:
PN - MOKO L72.2A
It also has:
TS-04
94V-0
4302
on the card.
I used this driver: http://lavalink.com/support-drivers/pci-...-port-epp/
The description says EPP but I am hoping that I can use a different mode.
I did go to this link: http://lavalink.com/support-drivers/lava...utilities/
but non of the utilities seem to work with a fully patched Windows 7 64bit machine.