LAVA: Forums

Full Version: looking for driver for old parallel PCI
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello. I am looking for a driver for an old Lava Parallel PCI card that I am trying to use on a Windows XP machine. Printed on the board is:

LAVA COMPUTERS
PTC-IV-0 9940
MADE IN CANADA
P.N. MOKO L72.1

on the back is says:
COPYRIGHT 1998 LAVA COMPUTER

Many thanks.
The following driver should support your card under Windows:

http://lavalink.com/wp-content/uploads/d..._07_15.zip

In order to install the card you will need to extract the contents of the zip file to a folder on your computer and once the card has been detected by the Hardware Wizard you will need to point it to the root of the extracted Windows folder.

One thing to note is that this card was manufactured before the parity requirements of modern motherboards (ie Motherboards Manufactured after 2006) so you may have trouble detecting the card or booting with the card on a newer Motherboard.

- Lava Support