11-14-2011, 08:00 PM
Issue:
The Ether-Serial Link (ESL) is password protected after a factory default reload, or when received from the factory. In order to configure the device via the Lava Manager or embedded webpage the user must provide a password.
Resolution:
For full administration access the configuration password is “admin”.
For port level access the configuration password is “portN”, where N is the logical port number. (i.e. Port 1 password would be “port1”, etc).
Applies to:
- All ESL Devices
The Ether-Serial Link (ESL) is password protected after a factory default reload, or when received from the factory. In order to configure the device via the Lava Manager or embedded webpage the user must provide a password.
Resolution:
For full administration access the configuration password is “admin”.
For port level access the configuration password is “portN”, where N is the logical port number. (i.e. Port 1 password would be “port1”, etc).
Applies to:
- All ESL Devices