Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trying to set the Parallel Port speed
05-25-2016, 12:45 PM,
Post: #1
Trying to set the Parallel Port speed
I have a very old BOCA printer that I want to get working on my Windows 7 64bit machine.
I have installed and verified that the printer is installed and working through Windows Device manager.

On the machine that I previously used I had to set the parallel port to PS/2 mode. ECP and EPP didn't work with the printer.

My Lava Card is:

PN - MOKO L72.2A
It also has:
TS-04
94V-0
4302

on the card.

I used this driver: http://lavalink.com/support-drivers/pci-...-port-epp/

The description says EPP but I am hoping that I can use a different mode.

I did go to this link: http://lavalink.com/support-drivers/lava...utilities/
but non of the utilities seem to work with a fully patched Windows 7 64bit machine.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)