LAVA: Forums
How to determine IRQ assignment in IP Extender - Printable Version

+- LAVA: Forums (https://forum.lavalink.com)
+-- Forum: Support (https://forum.lavalink.com/forumdisplay.php?fid=43)
+--- Forum: Serial Over IP (https://forum.lavalink.com/forumdisplay.php?fid=70)
+--- Thread: How to determine IRQ assignment in IP Extender (/showthread.php?tid=49989)



How to determine IRQ assignment in IP Extender - TAOlson - 11-29-2016

I think that I have an IRQ conflict with virtual COM4. I would like to reassign IRQ to test theory.

Minidump reports Interrupt storm as source of fatal.


RE: How to determine IRQ assignment in IP Extender - admin - 12-05-2016

Unfortunately with the driver being a virtual port all of the interrupt configuration and selection is performed under the hood by Microsoft so there is really no way select a different interrupt.

Was this ESL working fine before and did this issue recently pop up? That being said I would suggest performing a full uninstall and reinstall of the ESL driver to see if that resolves the issue.

- Lava Support